CNWINNEX BXPK Series
CNWINNEX EGDZ-M Mini Explosion-Proof Barrier Gate

CNWINNEX EGDZ-M Mini Explosion-Proof Barrier Gate

Perimeter Isolation for Hazardous Materials Storage Areas · ATEX Certified
MESSAGE
PRODUCT DESCRIPTION

Product Introduction

The CNWINNEX EGDZ-M mini explosion-proof barrier gate is a perimeter isolation device for hazardous materials storage areas. It differs fundamentally in purpose from conventional explosion-proof barrier gates used for vehicle access at plant gates and main passages: the latter serves vehicle entry and traffic management, whereas this product establishes a controllable physical boundary around hazardous storage areas, preventing unauthorized vehicles and personnel from entering the storage zone, avoiding vehicle impact on gas cylinders, vessels and stored equipment, and reducing the approach of outside personnel and ignition sources.


Typical installations include LNG cylinder storage yards, LPG cylinder banks, hazardous chemical holding areas, solvent and paint storage zones, skid-mounted equipment and spare-parts storage points, and explosion-proof work shelters or containerised hazardous-goods cabins. Such areas are often adjacent to plant roads, where forklifts, maintenance vehicles and transport trucks may enter unintentionally and personnel may walk through at will; warning signs alone do not provide effective restriction. The mini explosion-proof barrier gate uses a low-level physical boom with remote or interlocked control, converting reliance on personal compliance into physical restriction and raising the intrinsic safety management level of the storage area.


Application Scope

The product is suitable for industries including petroleum, chemical, pharmaceutical, metallurgy, textile, natural gas and fire protection. It is designed for Zone 1 and Zone 2 hazardous areas with explosive gas atmospheres of Groups IIA, IIB and IIC and Temperature Classes T1 to T6, as well as Zone 21 and Zone 22 areas with combustible dust. The unit is designed and manufactured in compliance with ATEX Directive 2014/34/EU and the EN 60079 series of explosion-protection standards, carrying the explosion-proof marking EX II 2 G Ex db IIC T6 Gb / EX II 2 D Ex tb IIIC T80℃ Db, with IP66 ingress protection for the complete unit, and is ATEX certified. EGDZ is the ATEX-certified explosion-proof barrier gate series; this product is the mini version within the series, model EGDZ-M.


Product Features

● Perimeter Isolation for Storage Areas, Not a Vehicle Access Device 

The product does not serve high-traffic vehicle access control at plant gates. It provides perimeter restriction for hazardous materials storage areas: the boom is placed across the storage-area entrance or a fence gap, forming a visible low-level physical barrier that prevents unauthorized vehicles from driving in and personnel from walking through, while preserving authorized access and emergency egress.

● Dual Flameproof and Dust Protection Design 

The cabinet and transmission are designed to flameproof (Ex db) and dust enclosure (Ex tb) requirements, with flamepath parameters, material thickness and sealing structures meeting the EN 60079 series. It suits storage areas where cylinder leakage or solvent vaporisation may create explosive gas or combustible dust atmospheres.

● IP66 Protection for Storage-Area Environments 

The cabinet base structure is IP44 rated; after explosion-proof conversion the complete unit achieves IP66 ingress protection, being dust-tight and resistant to strong water jets from all directions, suitable for washdown, rain, snow, sand and coastal salt-spray conditions around storage areas.

● Integrated Compression Structure Fitting Storage-Area Perimeters 

Custom micro bearings, a custom high-power motor and an independently designed shock-absorption block form a compact transmission core. With a cabinet of 220×325×400mm and a height of only 400mm, the unit can be installed directly on cramped ground beside cylinder areas, at fence gaps, next to cabin doors or at maintenance passage entrances, without allocating extra installation space.

● Special Movement for Reliable Long-Term Standby 

Custom movement connecting rods, main shaft crank arms and limit components form a dedicated mechanical assembly. Storage-area isolation devices usually work on a long-standby, intermittent-duty basis; this structure maintains accurate limits and free movement under low-frequency actuation, reducing the risk of seizure after long idle periods.

● Wide Operating Temperature from -30℃ to 80℃ 

A special-grade DC motor combined with automotive-grade high-temperature baking paint supports continuous standby and actuation in alpine cold and desert heat, adapting to varying climates in overseas energy projects.

● Remote Operation with Customizable Interlocks 

430MHz wireless remote control with an operating distance of approximately 30m allows operators to control the boom from a safe distance without prolonged presence inside the storage area; lifting and lowering time is adjustable from 3 to 6 seconds. Signal interfaces and interlock logic can be customized to interface with combustible gas detection alarms, area access control or fire interlock systems, keeping the boom lowered for isolation during alarm conditions.

● Adjustable Boom Balancing Isolation and Passage 

Straight boom up to 3m with telescopic boom freely adjustable, matching the entrance width of the storage area; boom ground clearance of 300mm creates a low-level barrier that blocks vehicle entry without hindering emergency egress or line of sight.



Technical Specifications

Table 1  Technical specifications of the CNWINNEX EGDZ-M mini explosion-proof barrier gate

Parameter

Specification

Model

EGDZ-M (Mini Type)

Barrier Type

Straight bar type

Motor Grade

Special Grade

Driven Method

DC motor

Rated Power

120W

Mainboard Brand

PTK

Input Power Supply

24V 10A

Motor Operating Temperature

-30℃ to 80℃

Running Speed

3–6s adjustable

Max Pole Length

3m straight pole (telescopic, freely adjustable)

Pole Specification

96×45×1.5mm (thickness)

Pole Height from Ground

300 mm

Dimension (L×W×H)

220×325×400 mm

Materials

Cold rolled steel sheet

Painting Process

Automotive-grade high-temperature baking paint

Colour

To be confirmed (customizable per project)

IP Rating

IP66 (complete unit after explosion-proof conversion)

Control Type

Wireless remote control (customizable interlock interface)

Remote Frequency

430MHz

Control Distance

Approx. 30m

Explosion-Proof Mark

EX II 2 G Ex db IIC T6 Gb / EX II 2 D Ex tb IIIC T80℃ Db, IP66


Typical Protection Scenarios

LNG cylinder storage yards: install the mini explosion-proof barrier gate at the entrance of the cylinder storage yard to prevent forklifts and transport vehicles from driving directly into the cylinder area and colliding with cylinders and piping; combined with warning signage and remote opening, only authorized personnel and vehicles may enter.



LPG cylinder banks and hazardous chemical holding areas: provide low-level physical isolation at the entrances of drummed solvent, paint and reagent holding areas, reducing unauthorized personnel crossing and external vehicles parking close by.



Skid-mounted equipment and spare-parts storage points: place isolation booms outside skid modules and spare-parts container areas, balancing loading access during operations with isolation when idle.



Explosion-proof work shelters and containerised hazardous-goods cabins: install isolation booms at shelter or cabin entrances to form a management loop of alarm-triggered isolation together with internal positive pressure and detection alarm systems.Temporary isolation during maintenance and loading: use the boom to mark the working boundary during operations, preventing unrelated vehicles from entering the operating radius.



Contact Us

For drawings, ATEX certificates, storage-area isolation design and customized interfaces, please contact the CNWINNEX engineering team. Website: www.cnwinnex.com; Email: info@cnwinnex.com;

FAQ
A:

CNWINNEX explosion-proof systems are widely deployed in oil & gas, petrochemicals, pharmaceuticals, ports & terminals, mining, power generation, offshore platforms, and other areas where flammable gases or dusts are present. Typical applications include control room climate control, hazardous area logistics and access management, video surveillance & security, pressurized analyzer shelters, robotic inspection, as well as custom explosion-proof enclosures and system integration.

A:

An explosion-proof air conditioner is a specialized HVAC unit designed for hazardous environments where flammable gases, vapors, or combustible dusts are present (e.g., petrochemical plants, gas stations, paint booths, pharmaceutical labs).

The most critical difference from a standard air conditioner lies in “active ignition prevention.” Standard units generate tiny sparks during normal operation – such as when relays open/close, compressors start/stop, or circuits make/break. While safe in normal air, these sparks can be deadly in an explosive atmosphere.

A:

CNWINNEX’s explosion-proof design is based on the T4 temperature class. For high-temperature regions such as the Middle East or areas with extreme summer heat, we offer custom units rated for ambient temperatures up to 60°C (140°F) , ensuring reliable operation without overload in harsh tropical climates. For cold regions, we offer custom units rated for ambient temperatures as low as -50°C (-58°F) , guaranteeing safe operation in extreme arctic conditions.

A:

The explosion-proof rating of CNWINNEX air conditioners is:
Ex 2 G D Ex db ib mb IIB T4 Gb / Ex 2 G D Ex db ib mb IIC T4 Gb / Ex ib mb tb IIIC T130°C Db
●For Gas (G): Ex db ib mb IIC T4 Gb
Suitable for IIC gas groups (including hydrogen, acetylene, etc.), using flameproof (db), intrinsic safety (ib), and encapsulated (mb) combined protection. Temperature class T4 (max surface temperature ≤135°C), Equipment Protection Level Gb.
●For Dust (D): Ex ib mb tb IIIC T130°C Db
Suitable for IIIC conductive dusts, using intrinsic safety (ib), encapsulation (mb), and dust-tight (tb) protection. Maximum surface temperature 130°C, Equipment Protection Level Db.

A:

CNWINNEX products comply with international explosion-proof certification standards such as ISO, CNEX, ATEX, IECEx, SAA, EAC, ensuring safe use in different countries and regions., and BV or DNV (for offshore applications) . Depending on the product type and zone classification, we offer various protection concepts including Ex d, Ex e, Ex ib, and Ex nA, with ingress protection up to IP66/IP67, ensuring safe and compliant operation in hazardous environments worldwide.

A:

Absolutely. Explosion-proof Custom Engineering is our sixth core business. From non-standard Ex components (special material junction boxes, intrinsically safe sensors, etc.) to integrated Ex systems (skid-mounted control rooms, pressurized cabins, legacy equipment retrofitting), we provide full-process custom services covering conceptual design, 3D simulation, compliance certification, manufacturing, and delivery. Simply share your operating parameters and functional needs, and we will engineer a dedicated explosion-proof safety solution for you.

Related
Message
SUBMIT